The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
The battery is charged, smartly... to perfect condition The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Blue Smart IP65 Charger 120V
Input voltage: 230 VAC
Standby power consumption: 0.5W
Minimum battery voltage: Starts charging from down to 0V
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'storage'
Charge current: 5A
Charge current in low current mode: 2A
Temperature compensation (lead-acid batteries only): 16 mV/°C
Can be used as power supply: Yes
Back current drain: 0.7Ah/month (1mA)
Protection: Reverse polarity, Output short circuit, Over temperature
Operating temp. range: -30 to +50°C (full rated output up to 30°C) (cables retain flexibility at low temperature)
Humidity (non condensing): Max 95%
Battery-connection: Black and red cable of 1.5 meter (4.9 feet)
230 V AC-connection: Cable of 1.5 meter (5.9 feet) with CEE 7/7, BS 1363 plug (UK) or AS/NZS 3112 plug